Air Filter Maintenance; Cleaning And Replacing The Filter - Sharp XG-E3000U Operation Manual

Air Filter Maintenance

1. Bottom Air Filter
AIR FILTER cover

Cleaning and Replacing the Filter

Turn OFF
1
the MAIN POWER.
ON
OFF
Turn off the MAIN POWER
switch.
POWER indicator goes off.
Unplug the power cord.
4
Clean the AIR FILTER.
Clean the dust off the air filter
and cover with a vacuum
cleaner extension hose.
Note:
Be sure the AIR FILTER COVER is securely installed. The power cannot be turned on unless it is correctly
installed.
2. Side Air Filter
E-31
The air filter should be cleaned every 100 hours of use. Clean the
filter more often when the projector is used in a dusty or smoky
location.
Have your nearest Authorized Sharp Industrial LCD Products Dealer
or Service Center exchange the filter (PFILD0058CEZZ) when it is
no longer possible to clean it.
Remove
2
the FILTER COVER.
Press the tab in the
direction of the arrow and
lift open the filter cover.
Tab
Press
5
Replace the AIR FILTER.
Place the filter underneath the
tabs on the filter frame.
Return the air filter to its
original position in the filter
cover opening.
• The side air filter cannot be removed.
• If dust or dirt has collected inside the filter, clean the
filter with a vacuum cleaner extension hose.
AIR FILTER (Not removable)
Remove
3
the AIR FILTER.
Grasp the air filter between
your fingers and lift it out of
the filter cover.
Open
Replace
6
the FILTER COVER.
Insert the tab on the end of
the filter cover into the filter
cover opening and press the
filter cover into position.