Location Of Controls - Sharp XG-E3000U Operation Manual

Table of Contents

Advertisement

Location of Controls

FRONT VIEW
Lamp cage cover
(Natural ventilation)
Cooling fan
(Intake vent)
OPERATION PANEL ON SIDE OF PROJECTOR
MENU
MN
MENU
button
SIDE AND REAR VIEW
Cooling fan
(Intake vent)
COMPOSITE
VIDEO INPUT 1
Video: BNC
Audio: RCA
S-VIDEO INPUT
(4-pin mini DIN)
COMPOSITE
VIDEO INPUT 2
Video: BNC
Audio: RCA
ON
MAIN POWER
OFF
switch
AC INLET
COMPOSITE VIDEO OUTPUT: BNC
Notes:
• The DC 5V OUTPUT jack cannot supply a current of more than 1A.
• When connecting a Macintosh Series computer that outputs C-SYNC, connect the cable to the COMPUTER RGB 2 INPUT
H-SYNC input terminal.
E-5
Speakers
Cooling fan
(Exhaust vent)
Carrying handle
Cautions:
The exhaust vent, the lamp cage cover and adjacent areas may be extremely hot during
projector operation. To prevent injury, do not touch these areas until they have sufficiently
cooled.
Allow at least 4" (10 cm) of space between the cooling fan (exhaust vent) and the other
nearest wall or obstruction.
If the cooling fan becomes obstructed, a protection device will automatically turn off the
projector lamp. This does not indicate a malfunction. Remove the projector plug from the
wall outlet and wait 10 minutes. Then turn on the power by plugging the cord back in. This
will return the projector to its normal mode.
ENTER
EN
ADJ.
ADJUSTMENT
( / , / ) buttons
ENTER button
RS-232C (D-sub 9-pin)
Use when controlling the projector
from your personal computer.
VIDEO
S-VIDEO
IN
1
A.C. 120V
IN
C.A. 120V
2
OUT
COMPUTER RGB
INPUT 1 connector (HD-15)
COMPUTER RGB OUTPUT connector (HD-15)
ON/OFF
POWER
LAMP
TEMP.
BLACK
SCREEN
LENS
MUTE
LN
B
BLACK
SCREEN
button
LENS button
MUTE button
MOUSE TERMINAL
Use when operating your personal computer with the
wireless mouse remote control.
Left Terminal: D-sub 9-pin (for IBM/Mac)
Right Terminal: 9-pin mini DIN (for NEC in JAPAN)
AUDIO
PC CONTROL
MOUSE
L
R
INPUT1
COMPUTER
RGB
OUTPUT
L
R
INPUT2
FILTER R
G
B
H
ON
OFF
Filter ON/OFF
COMPUTER RGB INPUT 2: BNC
switch
(R, G, B, H(C)-SYNC, V-SYNC)
POWER ON/OFF button
Remote sensor
POWER indicator
LAMP REPLACEMENT
indicator
TEMPERATURE WARNING
indicator
INPUT
SELECT
VOLUME
IN
VOLUME UP-
DOWN buttons
INPUT SELECT
button
WIRED REMOTE
FOR PC98
WIRED
CONTROL INPUT
REMOTE
(3.5 mm Mono Minijack)
AUDIO OUTPUT
COMPUTER
COMPUTER AUDIO INPUT
AUDIO IN
L
R
(3.5 mm Stereo Minijack)
AUDIO OUTPUT: RCA
DC5V OUTPUT
MAX CURRENT 1A
V
DC 5V 1A OUTPUT

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xg e3000e/u

Table of Contents