Mounting PN-TPC1 on Sharp PN-series Displays
1. Before beginning
Make sure to turn off the monitor and remove the AC power.
2. Items needed
Sharp PN series Professional Monitor
AC Power Adapter
4 x M4 (0.7x10mm) screws
2 x M3 (0.5x5 mm)
Philips Screw Driver
3. Attach the mounting plate
There are 8 holes on the mounting
plate, but only use 4 holes to match
the monitor's mounting holes
depending on the monitor model.
The mounting plate is attached to PN-
E421 in Figure 2.
Secure the mounting plate to the
monitor with four included M4 screws.