Water Tank Filter; Moisture Sensor - Siemens WT47XMH1CS User Manual And Installation Instructions

Table of Contents

Advertisement

18.3 Water tank filter
The filter in the water tank protects
the appliance from dirt and contamin-
ants.
Cleaning the water tank filter
Check the filter regularly and clean
the filter if it is dirty.
Requirement: The condensation con-
tainer → Page 31 is removed from
the appliance.
Pull out the filter.
1.
Clean the filter under warm, run-
2.
ning water or in the dishwasher.
Fit the filter.
3.
Insert the condensation container
4.
→ Page 32.
18.4 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
Cleaning and servicing en
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
ATTENTION!
Hard or rough objects may damage
the moisture sensor.
Do not use hard or rough objects,
abrasive cleaning products or steel
wool for cleaning.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Open the door.
1.
Clean the moisture sensor with a
2.
sponge.
47

Advertisement

Table of Contents
loading

Table of Contents