Table of Contents
Advertisement
en Troubleshooting
Fault
The appliance is not
working.
Appliance paused, but
the drum is rotating.
Home Connect is not
working properly.
No connection to the
home network.
Creasing.
50
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
Cooling process active.
Not a fault – no action required.
▶
Different causes are possible.
Go to www.home-connect.com.
▶
Wi-Fi is switched off.
→ "Activating Wi-Fi on the appliance", Page 37
▶
Wi-Fi is activated but a connection to your home net-
work cannot be established.
Ensure that the home network is available.
1.
Reconnect the appliance to the home network.
2.
→ "Connecting the appliance to a WLAN home net-
work (Wi-Fi) with WPS function", Page 35
→ "Connecting the appliance to a WLAN home net-
work (Wi-Fi) without WPS function", Page 36
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 24.
The laundry lies in the drum for too long after drying.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable programme for the type of fabric.
Set the suitable programme for the type of fabric.
▶
→ "Programmes", Page 24
Easy-Care fabrics are dried for too long.
→ "Changing the dryness level", Page 23.
▶
→ "Adjusting the dryness level", Page 23.
▶
Anti-Crease not activated.
Activate the Anti-Crease function.
▶
→ "Buttons", Page 22
→ "Buttons", Page 21
Advertisement
Table of Contents
