Siemens WT47XMH1CS User Manual And Installation Instructions page 30

Table of Contents

Advertisement

en operation
Requirement: The display shows the
following during operation:
Open the base unit → Page 45.
1.
Remove the fluff.
2.
Make sure that you remove all dirt
from the seal.
Clean the insides thoroughly under
3.
running water and then dry them
off.
You can remove heavy soiling
carefully with a soft brush.
Ensure that you thoroughly dry off
the filter. If the filter is damp, this
may increase the drying time and
affect the drying result.
30
Pull the fluff collector out horizont-
4.
.
ally.
The fluff collector may contain con-
densation, which may drip out of it
when you pull it out.
Open the fluff collector and re-
5.
move any fluff.

Advertisement

Table of Contents
loading

Table of Contents