Condensation Container - Siemens WT47XMH1CS User Manual And Installation Instructions

Table of Contents

Advertisement

Clean the filter thoroughly under
6.
running water and then dry it off.
You can remove heavy soiling
carefully with a soft brush.
You must not damage or remove
the fluff collector's seal.
You can clean the fluff collector in
the dishwasher.
Close the fluff collector until the
7.
tab engages.
Slide the fluff collector in horizont-
8.
ally as far as it will go.
Close the base unit → Page 46.
9.
11.11 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Note: Operate this appliance using
the water drain hose provided. If you
connect the water drain hose
→ Page 13, you do not have to regu-
larly empty the condensation con-
tainer → Page 31.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡ The display shows the following
after drying: "-0-"
¡ or during operation:
Pull out the condensation con-
1.
tainer, keeping it level.
operation en
.
31

Advertisement

Table of Contents
loading

Table of Contents