Table of Contents
Advertisement
Fault
and programme
terminated.
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
The programme does
not start.
Cause and troubleshooting
Condensation tank filled.
→ "Emptying the condensation container", Page 31.
1.
→ "Inserting the condensation container", Page 32.
2.
→ "Starting the programme", Page 29.
3.
Water drain hose is caught or jammed.
Ensure that the water drain hose is not kinked or
1.
trapped.
Route the water drain hose without kinks.
2.
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 13
Water drain hose is blocked.
Rinse the water drain hose with tap water.
▶
The filter for the condensation tank is soiled.
→ "Clean the filter for the condensation tank.",
▶
Page 48.
Foreign object is located in the base unit
→ "Opening the base unit", Page 45.
1.
Remove the foreign objects that are present.
2.
→ "Closing the base unit", Page 46.
3.
Dirt in the appliance.
→ "Preparing the appliance for the intensive appli-
▶
ance care programme", Page 42.
The appliance uses condensation for the automatic
self-cleaning.
Not a fault – no action required.
▶
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 13
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 32
▶
You have not pressed start/doplnění
Press start/doplnění
▶
No programme set.
→ "Setting a programme", Page 28.
1.
→ "Starting the programme", Page 29.
2.
Troubleshooting en
.
.
51
Advertisement
Table of Contents
