Table of Contents
Advertisement
en Environmental protection and saving energy
Add approx. 180 ml cold drinking
1.
water through the front opening,
using the water jug provided.
Check the water tank filter regu-
larly and clean the filter if it is dirty.
→ "Cleaning the water tank filter",
Page 47
If does not go out on the display,
add cold drinking water through
the front opening and align the ap-
pliance correctly.
→ "Aligning the appliance",
Page 16
a goes out on the display.
Insert the condensation container
2.
→ Page 32.
Start the programme.
3.
→ "Starting a programme with the
crease-removal function", Page 33
14 Environmental protec-
tion and saving en-
ergy
14.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
Sort the individual components by
▶
type and dispose of them separ-
ately.
34
14.2 Saving energy
If you follow these instructions, your
appliance will use less power.
Operate the appliance in a well-vent-
ilated room and keep the air inlet on
the appliance clear.
a If air exchange is impeded, this ex-
tends the programme duration and
increases energy consumption.
Spin the laundry in the washing ma-
chine before drying.
a If the laundry is excessively damp,
this extends the programme dura-
tion and increases energy con-
sumption.
Observe the programme's maximum
load capacity.
→ "Programmes", Page 24
a If the maximum load is exceeded,
this extends the programme dura-
tion and increases energy con-
sumption.
Dry the filters in the filter system of
the base unit → Page 29 thoroughly
after cleaning.
a If the filters are damp, this extends
the programme duration and in-
creases energy consumption.
Deactivate Wi-Fi on the appliance
→ Page 37 if it is not being used.
a If the Wi-Fi is activated, this in-
creases energy consumption.
Advertisement
Table of Contents
