Table of Contents
Advertisement
en Cleaning and servicing
Put the appliance into standby
7.
mode.
→ "Put the appliance into standby
mode", Page 35
Cleaning and servicing
18 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Tips on cleaning and
care
Wipe down the
housing and the
controls with
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Leave the appli-
ance door open
after use.
18.2 Water tank filter
The filter in the water tank protects
the appliance from dirt and contamin-
ants.
Cleaning the water tank filter
Check the filter regularly and clean
the filter if it is dirty.
Requirement: The condensation con-
tainer → Page 37 is removed from
the appliance.
48
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
Pull out the filter.
1.
Clean the filter under warm, run-
2.
ning water or in the dishwasher.
Fit the filter.
3.
Insert the condensation container
4.
→ Page 38.
18.3 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
Advertisement
Table of Contents
