Table of Contents
Advertisement
2
Material damage
avoid
huh
use this instruction to
avoid damage and damage to the
device.
PAY ATTENTION!
Incorrect dosage of fabric softeners,
detergents, care products and
cleaning agents can affect the
functioning of the appliance.
Follow the manufacturer's dosing
▶
recommendations.
Exceeding the maximum load
quantity affects the operation of the
appliance.
Observe and do not exceed the
▶
maximum load for each
programme.
→ "Programs", Page 24
Overheating of the device can affect
the operation of the device.
Keep the air inlet of the device
▶
clear during operation.
Provide adequate ventilation in
▶
the room.
Light objects, such as hair and fluff,
can be drawn into the air inlet of the
device during operation and affect the
function of the device.
Keep the environment clean while
▶
using the device.
Keep light objects away from the
▶
device.
Operation with a missing, incomplete
or defective fluff guard (depending on
the device equipment, e.g. fluff filter,
fluff container, filter mat) can lead to
damage to the device.
Do not use the appliance with a
▶
missing, incomplete or defective
fluff guard.
Avoid material damage NL
Foam or foam rubber may deform
or melt when dried.
Do not dry foam or foam rubber
▶
laundry.
Unsuitable cleaning agents can
damage the surfaces of the device.
Do not use sharp or abrasive
▶
cleaning agents.
Do not use strong alcohol-based
▶
cleaning agents.
▶ Do not use hard scouring or
dishwashing sponges.
Clean the device only with water
▶
and a soft, damp cloth.
Remove all detergent residues,
▶
spray mist or residues immediately
upon contact with the appliance.
3 Environmental protection and
savings
3.1 Disposal of the packaging
The packaging materials are
environmentally friendly and can be
reused.
▶ Dispose of the individual components
separately according to type.
3.2 Saving energy
If you follow these directions, your
device will use less power.
Use the device in a well-ventilated
area and keep the air inlet of the
device clear.
a A hindered air exchange
extends the program duration and
increases energy consumption.
11
Advertisement
Table of Contents
