Media Browser Menu; Loop/Shuffle Mode Operation; Followme Tv (If Available); Cec And Cec Rc Passthrough - VESTEL STAR WARS SAGA 22FA7100 Operating Instructions Manual

You can use USB hubs with your TV's USB
inputs. External power supplied USB hubs are
recommended in such a case.
It is recommended to use the TV's USB
input(s) directly, if you are going to connect
a USB hard disk.
NOTE: When viewing image files the Media
Browser menu can only display 1000 image
files stored on the connected USB device.

Media Browser Menu

You can play photo, music and movie files
stored on a USB disk by connecting it to your
TV. Connect a USB disk to one of the USB
inputs located on the side of the TV. Pressing
the Menu button while in the Media Browser
mode will access the Picture, Sound and
Settings menu options. Pressing the Menu
button again will exit from this screen. You
can set your Media Browser preferences by
using the Settings menu.
Loop/Shuffle Mode
Operation
Start playback with
the Play button and
activate
Start playback with
the OK button and
activate
Start playback with
the Play button and
activate
Start playback with
the Play button and
activate ,

FollowMe TV (if available)

With your mobile device you can stream
the current broadcast from your smart TV
All files in the list
will be continuously
played in original
order
The same file will be
played continuously
(repeat)
All files in the list will
be played once in
random order
All files in the list
will be continuously
played in the same
random order.
English - 72 -
using the FollowMe TV feature. Install the
appropriate Smart Center application to your
mobile device. Start the application.
For further information on using this feature
refer to the instructions of the application
you use.
Note: This application may not be compatible
with all mobile devices. HD channels are not
supported and both of the devices must be
connected to the same network.
CEC and CEC RC
Passthrough
This function allows to control the CEC-
enabled devices, that are connected through
HDMI ports by using the remote control of
the TV.
C E C
T h e
System>Settings>More menu should be set
as Enabled at first. Press the Source button
and select the HDMI input of the connected
CEC device from the Sources List menu.
When new CEC source device is connected,
it will be listed in source menu with its own
name instead of the connected HDMI ports
name(such as DVD Player, Recorder 1 etc.).
The TV remote is automatically able
to perform the main functions after the
connected HDMI source has been selected.
To terminate this operation and control
the TV via the remote again, press Quick
Menu button on the remote, highlight the
CEC RC Passthrough and set as Off by
pressing Left or Right button. This feature
can also be enabled or disabled under the
System>Settings>More menu.
The TV supports also ARC(Audio Return
Channel) feature. This feature is an audio
link meant to replace other cables between
the TV and the audio system (A/V receiver
or speaker system).
o p t i o n i n t h e