Using Satcodx Feature; Media Playback Via Usb Input - VESTEL STAR WARS SAGA 22FA7100 Operating Instructions Manual

System>Settings>More menu and can be
turned off/on later.
Press OK button on the remote control to
continue and the Network/Internet Settings
menu will be displayed, if you confirm the
previously displayed message asking whether
you want to do the network settings. Please
refer to Connectivity section to configure
a wired or a wireless connection. After the
settings are completed press OK button to
continue. To skip to the next step without
doing anything select No and press the OK
button when the message is displayed asking
whether you want to do the network settings.
After the initial settings are completed TV will
start to search for available broadcasts of the
selected broadcast types.
After all the available stations are stored,
scan results will be displayed. Press OK to
continue. The Edit Channel List menu will
be displayed next. You can edit the channel
list according to your preferences or press the
Menu button to quit and watch TV.
While the search continues a message may appear, asking
whether you want to sort channels according to the LCN(*).
Select Yes and press OK to confirm.
(*) LCN is the Logical Channel Number
system that organizes available broadcasts
in accordance with a recognizable channel
number sequence (if available).
NOTE: Do not turn off the TV while
initializing first time installation. Note that,
some options may not be available depending
on the country selection.
In the TKGS system, channels can be blocked
by the service provider and Audio/Video
transmission will not be available from these
channels.

Using SatcoDX Feature

You can perform SatcoDX operations using
the Installation>Satelite Settings menu. In
the SatcoDX menu, there are two options
regarding to the SatcoDx.
You can download or upload SatcoDX data.
In order to perform these functions a USB
device must be connected to the TV.
You can upload current services and related
satellites & transponders in TV, to a USB
device.
Additionally you can download one of the
SatcoDx files stored in USB device, to the TV.
When you select one of these files, all services
and related satellites and transponders in
the selected file will be stored in the TV. If
there are any installed terrestrial, cable and/
or analog services, they will be kept and only
satellite services will be removed.
Afterwards, check your antenna settings and
make changes if necessary. An error message
stating "No Signal" may be displayed if the
antenna settings are not configured properly.

Media Playback via USB Input

You can connect 2.5" and 3.5" inch (hdd with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB inputs of the TV.
IMPORTANT! Back up the files on your
storage devices before connecting them to
the TV. Manufacturer will not be responsible
for any file damage or data loss. Certain types
of USB devices (e.g. MP3 Players) or USB
hard disk drives/memory sticks may not be
compatible with this TV. The TV supports
FAT32 and NTFS disk formatting.
While formatting USB hard drives which have
more than 1TB (Tera Byte) storage space
you may experience some problems in the
formatting process.
Wait a little while before each plugging and
unplugging as the player may still be reading
files. Failure to do so may cause physical
damage to the USB player and the USB
device itself. Do not pull out your drive while
playing a file.
English - 71 -