Connectivity; Wired Connectivity; To Connect To A Wired Network; Configuring Wired Device Settings - VESTEL STAR WARS SAGA 22FA7100 Operating Instructions Manual

J

Connectivity

J

Wired Connectivity

To Connect to a Wired Network

• You must have a modem/router connected
to an active broadband connection.
• Ensure that Nero Media Home software
is installed to your PC (for Audio Video
Sharing function). See "Nero Media Home
Installation" section.
• Connect your PC to your modem/router.
This can be a wired or wireless connection.
• Connect your TV to your modem/router
via an ethernet cable. There is a LAN port
at the rear (back) of your TV.
Broadband ISP connection
LAN (ethernet) cable
LAN input on the rear side of the TV
• To access and play shared files, you must
select the Media Browser. Press the Menu
button and select Media Browser. Press
OK to continue. Select the desired file type
and press OK. You must always use the
Media Browser screen to access and play
shared network files.
• PC/ HDD/ Media Player or any other
devices that are compatible should be used
with a wired connection for higher playback
quality.
To configure wired settings please refer to
the Network/Internet Settings section in
the System>Settings Menu.
• You might be able to connect your TV to
your LAN depending on your network's
configuration. In such a case, use an ethernet
cable to connect your TV directly to the
network wall outlet.
LAN input on the rear
side of the TV

Configuring Wired Device Settings

Network Type

The Network Type can be selected as Wired
Device, Wireless Device or Disabled, in
accordance with the active connection to the
TV set. Select this as Wired Device if you are
connecting via an ethernet.

Internet Speed Test

Highlight Internet Speed Test and press the OK but-
ton. TV will check the internet connection bandwidth
and display the result when complete.

Advanced Settings

Highlight Advanced Settings and press the OK
button. On the next screen you can change the IP
and DNS settings of the TV. Highlight the desired one
and press Left or Right button to change the setting
from Automatic to Manual. Now you can enter the
Manual IP and / or Manual DNS values. Select the
related item in the drop down menu and enter the
new values using the numeric buttons of the remote.
Press the OK button to save settings when complete.
Wireless Connectivity

To Connect to a Wireless Network

IMPORTANT: "Veezy 200" USB dongle
is required to use wireless network features.
The TV cannot connect to the networks with
a hidden SSID. To make your modem's SSID
visible, you should change your SSID settings
via the modem's software.
To Connect to a wireless LAN, you should
perform the following steps:
1. Ensure that Nero Media Home software
English - 85 -
network
wall socket