Accessories Included; Standby Notifications; Tv Control Switch & Operation; Operation With The Remote Control - VESTEL STAR WARS SAGA 22FA7100 Operating Instructions Manual

• Ethernet (LAN) for Internet connectivity
and service
• 802.11 a/b/g/n WIFI Support via USB don-
gle (not supplied)
• Audio Video Sharing

Accessories Included

• Remote Control
• Batteries: 2 x AAA
• Instruction Book

Standby Notifications

If the TV does not receive any input signal
(e.g. from an aerial or HDMI source) for 5
minutes, it will go into standby. When you
next switch-on, the following message will be
"TV switched to stand-by mode
displayed:
automatically because there was no signal
for a long time." Press OK to continue.
If the TV is on and it isn't being operated
for a while it will go into standby. When you
next switch-on, the following message will be
"TV switched to stand-by mode
displayed.
automatically because no operation was
made for a long time." Press OK to continue.
TV Control Switch
& Operation
1. Up direction
2. Down direction
3. Volume / Info / Sources List selection and
Standby-On switch
The Control button allows you to control the
Volume / Programme / Source and Standby-
On functions of the TV.
To change volume: Increase the volume by
pushing the button up. Decrease the volume
by pushing the button down.
To change channel: Press the middle of the
button, the information banner will appear on
the screen. Scroll through the stored channels
by pushing the button up or down.
To change source: Press the middle of the
button twice(for the second time in total), the
source list will appear on the screen. Scroll
through the available sources by pushing the
button up or down.
To turn the TV off: Press the middle of
the button down and hold it down for a few
seconds, the TV will turn into standby mode.
Notes:
• If you turn the TV off, this circle starts again
beginning with the volume setting.
• Main menu OSD cannot be displayed via
control button.

Operation with the Remote Control

Press the Menu button on your remote
control to display main menu screen. Use the
directional buttons to select a menu tab and
press OK to enter. Use the directional buttons
again to select or set an item. Press Return/
Back or Menu button to quit a menu screen.
Input Selection
Once you have connected external systems
to your TV, you can switch to different input
sources. Press the Source button on your
remote control consecutively to select the
different sources.
Changing Channels and Volume
You can change the channel and adjust
the volume by using the Volume +/- and
Programme +/- buttons on the remote.
English - 63 -