Entries; Server Code Entries; Item Selection From The Function Menu Windows - Sharp UP-820N Instruction Manual

Entries

6

Server Code Entries

Prior to an item entry, the server will be compelled to enter his or her assigned server code. However, this may not
be necessary when the POS terminal has been programmed for "stay-down server mode."
Procedure
XXXX
Server code
• When the server entry on system is programmed for "stay-down server mode," no server can sign on
NOTE
while another server signs.
• When the server entry system is programmed for "automatic server sign-off mode," a server must sign
on prior to each sales transaction.
The sign-off operation can be performed by using the following procedure in the REG.
To sign off a server:
• Depending upon how your POS terminal has been preset, if an item entry is attempted when the server
NOTE
has not signed on, server entry will be prompted on the window to compel server entry.

Item Selection from the Function Menu Windows

Your POS terminal allows you to select functions from specified function menu windows depending upon the
terminal setup. For example, if you want to finalize a charge 2 sale, select the option "CHG 2" from the charge
menu instead of pressing the
Each menu can be opened as follows:
XXXX
CASH
Secret code
#
CASH
#
key.
CHG
2
ENTER
Drawer no.
— 27 —
X
ENTER