Troubleshooting; Maintenance And Cleaning; Disposal - Parkside PET 25 C3 Translation Of The Original Instructions

Troubleshooting

CAUTION!
► Ensure that the appliance has been discon-
nected from the power in order to prevent it
from being accidentally switched on and
causing injuries .
Cause
A staple or nail is blocking the appliance .
Solution
♦ Open the magazine slider
the tension . Use the hex key (fig . D) to remove
the screws from the face plate
♦ Remove the staple or nail .

Maintenance and cleaning

WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance .
The electric staple gun is maintenance free .
■ The appliance must always be kept clean, dry
and free from oil or grease .
■ Always clean the appliance directly after
finishing work .
■ Never permit liquids to enter inside the appliance .
■ Use a cloth to clean the housing . Never use
petrol, solvents or cleansers which can damage
plastic .
PET 25 C3

Disposal

collected separately and recycled in an environ-
. This will remove
mentally compatible manner .
Your local community or municipal authorities can
.
provide information on how to dispose of the
appliance .
components for disposal if necessary . The pack-
aging material is labelled with abbreviations (b)
and numbers (a) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites
The packaging consists of environ-
mentally friendly material . It can be
disposed of in the local recycling
containers .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU
requires that worn-out power tools be
Dispose of the packaging in an envi-
ronmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product .
GB │ MT │ 37 ■