Table of Contents
Advertisement
Problem
Foam is overflowing from
the detergent drawer.
Laundry remains wet at the
end of the programme. (*)
(*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to
prevent any damage to the product and to its surrounding environment. Laundry should be rearranged and
re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
A
CAUTION:
section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional
product yourself.
44 / EN
Reason
Too much detergent is used.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
If you cannot eliminate the problem although you follow the instructions in this
Solution
• Mix 1 tablespoonful softener and ½ l water
and pour into the main wash compartment
of the detergent drawer.
• Put detergent into the product suitable
for the programmes and maximum
loads indicated in the "4.6.2 Programme
and consumption table". When you use
additional chemicals (stain removers,
bleaches and etc), reduce the amount of
detergent.
• Use recommended amount of detergent.
Washing Machine / User's Manual
Advertisement
Table of Contents
