Adjusting The Feet; Electrical Connection - Beko WMB 91242LB User Manual

4.4.6 Adjusting the feet

A
CAUTION:
must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise,
the product may move from its place and cause crushing and vibration problems.
CAUTION:
1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands in a stable and balanced way.
3. Tighten all lock nuts by hand again.

4.4.7 Electrical connection

Connect the product to a grounded outlet protected by a 13 A fuse. Our company shall
not be liable for any damages that will arise when the product is used without grounding
in accordance with the local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 13 Amps, have a
qualified electrician install a 13 Amp fuse.
• The voltage specified in the "Technical specifications" section must be equal to your
mains voltage.
• Do not make connections via extension cables or multi-plugs.
B
WARNING:
Electrical requirements
Before you insert the plug into the wall socket make sure that the voltage and the
frequency shown in the rating label corresponds to your electricity supply.
We recommend that this appliance be connected to the mains supply via a suitable
switched and fused socket in a readily accessible position.
Should the mains lead of the appliance become damaged or need replacing at any time,
it must be replaced by a special purpose made mains lead which can only be obtained
from a Authorised Service Agent.
B
WARNING:
15 / EN
In order to ensure that the product operates more silently and vibration-free, it
Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
Damaged power cables must be replaced by the Authorised Service Agents.
This appliance must be earthed
Washing Machine / User's Manual