Table of Contents
Advertisement
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off
and an appropriate plug fitted.
Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock
hazard if inserted into a socket elsewhere in the house.
The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to
be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not
forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not
be used until a replacement fuse cover has been fitted. Colour of the replacement fuse
cover must be the same colour as that visible on the pin face of the plug. Fuse covers are
available from any good electrical store.
Important
Fitting a different plug
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply connections.
3. Drain all water that has remained in the product.
4. Install transportation safety bolts in the reverse order of removal procedure.
C
Never move the product without the transportation safety bolts properly fixed in place!
A
WARNING:
place away from reach of the children.
16 / EN
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals on your plug, proceed as follows:
1
Connect the green - yellow or green (earth) wire to the
terminal in the plug marked 'E' or with the symbol f or
coloured green and yellow or green.
2
Connect the blue (neutral) wire to the terminal in the
plug marked 'N' or coloured black.
3
Connect the brown (live) wire to the terminal in the
plug marked 'L' or coloured red.
With the alternative plugs a 13A fuse must be fitted either
in the plug or adaptor or in the main fuse box. If in doubt
contact a qualified electrician.
Packaging materials are dangerous to children. Keep packaging materials in a safe
Washing Machine / User's Manual
Advertisement
Table of Contents
