Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko WMB 91242 DLSC
Summary of Contents for Beko WMB 91242 DLSC
-
Page 1: Washing Machine
WMB 91242 DLSC Washing Machine... - Page 2 Please read this manual first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1 Your Washing Machine Auxiliary functions ....19 Time display ....19 Overview . -
Page 4: Your Washing Machine
Overview 1 - Detergent Drawer 4 - Control Panel 2 - Door 5 - Filter Cap 3 - Top Lid 6 - Height-adjustable feet... -
Page 5: Specifications
Specifications Models WMB 91242 DLSC Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net Weight (±4 kg) Electricity (V/Hz.) 220-240 V / 50Hz Total Current (A) 2000-2350 Total Power (W) 1200 Spinning cycle (rpm max.) Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. -
Page 6: Warnings
Warnings Please read the following information. Otherwise, there may be the risk of First Use personal injury or material damage. • To prepare your machine for washing, Moreover, any warranty and reliability carry out your first washing process commitment will become void. without loading your machine and with detergent under “Cottons 90°C” General Safety program. • Never place your machine on a carpet • Ensure that the cold and hot water covered floor. Otherwise, lack of connections has been made correctly airflow from below of your machine... -
Page 7: Safety Instructions
If there are children in your capabilities, or lack of experience and knowledge, unless they have house... been given supervision or instruction • Electrical appliances may be concerning use of the appliance by a dangerous for the children. Keep person responsible for their safety. children away from the machine when it is operating. -
Page 8: Installation
Installation Removing packaging washing machine needs to be moved again in the future. reinforcement Never move the appliance without the Tilt the machine to remove the packaging transportation safety bolts properly reinforcement. Remove the packaging fixed in place! reinforcement by pulling the ribbon. Appropriate installation location Install the appliance in environments which have no risk of freezing, in a stable and... -
Page 9: Connecting To The Drain
higher. • Models with a single water inlet should • Connect the special hoses supplied not be connected to the hot water with the machine to the water intake tap. Laundry may be damaged or the valves on the machine. The hose appliance may switch to protection bearing the “red” sign (90°C max) mode and not work. is the hot water inlet and the hose bearing the “blue” sign (25°C max) is When returning the appliance to its place... -
Page 10: Electrical Connection
discharge, the end of the hose must domestic waste. not be submerged in the drain water. Packaging materials of your machine are The end of the hose must be able manufactured from recyclable materials. to take in air. The hose should be pushed into the drainage for more Disposing of the old machine than 15 cm. -
Page 11: Initial Preparations For Washing
Initial preparations for washing Sorting the laundry • Empty pockets and remove all foreign objects such as coins, pens and • Sort the laundry according to type of paper clips. If possible, turn pockets fabric, colour, and degree of soiling out and brush. and permissible water temperature. • Place small items like infants’ socks Always follow the advice on the and nylon stockings, etc. -
Page 12: Loading Door
Detergent, softener and other Following weights are given as examples. cleaning agents Laundry type Weight (gr.) Add detergent and softener before starting Bathrobe 1200 the washing Programme. Napkin Never open the detergent dispenser drawer while the washing Programme is Duvet cover running! Bed Sheet When using a Programme without pre- Pillowcase wash, no detergent should be put into the Tablecloth pre-wash compartment (Compartment Towel... - Page 13 Detergent quantity for prewashing 1/2 measure for main washing 1 measure an additional 1/2 with hard water measure Softener Put the softener into the softener compartment of the detergent dispenser. • Use the proportions recommended on the packet. • Never exceed the (> max <) level marking; otherwise, the softener will be wasted without being used. • If the softener has lost its fluidity, dilute dense softener with water before placing it in the detergent drawer.
-
Page 14: Selecting A Program And Operating Your Machine
Selecting a Program and Operating Your Machine Control panel 1 - Spin Speed Adjustment Button Display 3 - Temperature Adjustment Button 4 - Program Selection Knob 5 - On/Off Button 6 - Time Delaying Button (+/-) 7 - Auxiliary Function Buttons 8 - Start/Pause/Cancel Button Dark wash Dark wash Synthetics Cottons Pre-wash Main Rinse Wash Spin Delicates... -
Page 15: Display Symbols
Display symbols washing, rinsing and, if required, spin cycles. c d e When selecting the program you are going to use, always consider type of fabric, color, degree of soiling and permissible water temperature. Always select the lowest required temperature. Higher temperature means higher power consumption. - Page 16 ensure very good washing performance. Cottons economy program consumes less energy compared to other cottons programs. • Babycare Increased hygiene is provided by a longer heating period and an additional rinse cycle. It is recommended for baby clothes and clothes worn by allergic people. •...
-
Page 17: Special Programs
the door ajar to allow the inside of the 40˚C Blended clothes including synthetics machine get dry. 30˚C and woolens as well as delicates. This is not a program for washing Cold laundry. This is a maintenance Economy Symbol program for the machine. Shows energy saving programs and Never use this program if there is temperature selections. -
Page 18: Program And Consumption Table
Program and consumption table Auxiliary functions Selectable Programme (°C) temperature range °C Cottons 1600 • • • • • • 90-Cold Cottons 1600 • • • • • • 90-Cold Cottons 1600 • • • • • • 90-Cold Babycare 1600 •... -
Page 19: Auxiliary Functions
Auxiliary functions • Use this function for smaller amounts or slightly soiled laundries. Auxiliary Function Selection Buttons • Rinse Plus When this function (c) is selected, washing and rinsing is performed with plenty of water. “F3” symbol lights up on the display. • Anti-Creasing With this function (d), drum movement will be lessened to prevent creasing and spinning speed is limited. -
Page 20: Starting The Program
Time delay 2. Start symbol will fade. The standby With the “Time delay” function you can symbol and the time delaying symbol delay the program start up to 24 hours. will flash. Setting can be made in intervals of 30 3. Press time delaying button “-” to decrease the desired time delay. -
Page 21: Changing The Selections After The Program Has Started
Door lock special programs. • If the machine is not spinning, the The Door Locked Symbol lights up when program may be in rinse hold mode the loading door is locked. This symbol or the automatic spin correction will flash until the door is allowed to open. system has been activated due to an Do not force the door at this stage. -
Page 22: Program In Rinse Hold Mode
cancellation was made will remain lit and “End” will appear on the screen. Program in rinse hold mode • This process is shown with the flashing Spin Symbol and the lit up Standby Symbol. If you wish to spin when the machine is in this mode: Adjust the spin speed. Press “Start/Pause/ Cancel”... -
Page 23: Quick Instructions For Daily Use
Quick instructions for daily use Preparation 1. Press “Start/Pause/Cancel” button. 1. Turn the tap on completely. Check that 2. Open the loading door and put in the hose is connected tightly. more laundry. 2. Place the laundry in the machine. 3. Close the loading door. 3. Add detergent and softener. 4. Press “Start/Pause/Cancel” button. Starting Programme is in rinse hold mode 1. Press the “On/Off” button. -
Page 24: Cleaning And Care
Cleaning and care Detergent drawer Clean the drum with a stainless steel cleaning agent. Never use steel wool Remove any powder residue buildup in or wire wool. the drawer. To do this; 1. Press the dotted point on the siphon Outer cabinet and control panel in the softener compartment and pull towards you until the compartment is When necessary: removed from the machine. -
Page 25: Draining Any Remaining Water And Cleaning The Pump Filter
under streaming water. You can remove the filter cover • Replace the gaskets and filters by slightly pushing the kick plate carefully and tighten the hose nuts by downwards with a screwdriver, hand. through the gap above the filter cover. Draining any remaining water and cleaning the pump filter Filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump propeller... - Page 26 • Place a large container in front of the filter to receive water flowing from the filter. • Loosen pump filter (anticlockwise) until water starts to flow out of it. Direct the flowing water into the container you have placed in front of the filter. You can use a piece of cloth to absorb any spilled water. • When there is no water left, turn the pump filter until it is completely loose and remove it.
-
Page 27: Solution Suggestions For Problems
Solution suggestions for problems Cause Explanation / Suggestion Programme cannot be started or selected. Machine may have switched to self Bring your machine to factory settings by turning protection mode due to an infrastructure the Programme selection knob. (see, Ending the problem (such as line voltage, water Programme through Cancelling) pressure, etc.). Water in the machine. There may be some water in your machine when you receive it. This is from the quality It is not harmful to your machine. - Page 28 The door is jammed. - Water level might be above the lower level of the door. - Machine might be heating up the water or - Run either the “Pump” or “Spin” Programme. it may be at the spinning cycle. - Wait until the process is over. - Due to an electrical mechanism, the door - Wait until the process is over.
- Page 29 It continuously washes. Remaining time does not count down. - The machine will wait until there is sufficient amount of water to avoid poor washing results due In the case of a paused countdown while to lack of water. Then the timer will start to count taking in water: down.
- Page 30 - Washing performance is poor: Oily stains appear on laundry. - Washing performance is poor: Bad odour - Such odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short Programmes. - Oily accumulations on the drum may have - Leave the detergent dispenser drawer as well stuck to the laundry. as the loading door of the machine ajar after each - Oily accumulations on the drum may have washing.
- Page 31 Clothes do not smell like the softener. - If the water hardness is higher, using insufficient amount of detergent can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness. - Insufficient amount of detergent used. - If detergent is put in the prewash compartment - The detergent was placed into the wrong although prewash cycle is not selected, machine...
- Page 32 Machine does work. Nothing is displayed on the screen. The plug might not be plugged in the mains outlet. Check the plug. Fuse may have blown. Check the fuse. Electricity may be cut off. Check the supply power. The “On/Off” button might have not been Press this button. pressed. The machine did not start after the program was selected and the «Start/Pause/Cancel» button was pressed. The front door may be ajar. The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the model of your machine, water cut-off symbol may light up too) You can restart your machine by pressing the «Start/...