Smeg A2PYID-8 Manual page 8

Instructions for the user
4.1 Description of the controls on the front panel
4.1.1 Programming clock
The programming clock allows to display the current time or to set a timer or a
programmed cooking operation.
4.1.2 Temperature selection knob
The cooking temperature is selected by turning the knob clockwise to the required
setting, between the maximum and the minimum settings.
When the indicator light is flashing, it indicates that the oven is heating up to the
temperature set using the thermostat knob. Once the oven has reached the
selected temperature, the light stops flashing and remains lit steadily until the oven
is switched off. Moreover, the light switches on when the automatic cleaning cycle
(pyrolysis) starts and remains lit until the cycle is complete.
4.1.3 Function selection knob
The oven's various functions are suitable for different cooking modes. After
selecting the required function, set the cooking temperature using the thermostat
knob. For more information on cooking functions, see: "8. OVEN FUNCTIONS".
The door locking device indicator light ( ) only comes on when the automatic
cleaning cycle is activated.
4.1.4 Cooking zone control knob
Using these knobs you can control the cooking zones of the induction hob. The hot
plate controlled is indicated above every knob. Turn the knob to the right to adjust
the operating power of the hot plate that goes from a minimum of 1 to a maximum of
9. The working power is indicated on a display positioned on the hob.
58