Table of Contents
Advertisement
SERVICE WORK ON THE CHASSIS 11
–
Now press the fluid into the system until it emerges from
6
hole
of the master cylinder without bubbles.
–
Occasionally extract the fluid from the master cylinder reser-
voir to prevent overflowing.
–
Tighten the bleeder screw and remove the bleeding syringe
with the hose. Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
D07660-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
4 mm (0.16 in)
75
Advertisement
Table of Contents
