Table of Contents
Advertisement
Configuring the receiver
Ch 4
English
Returning to the next higher menu level or exiting the menu
To return to the next higher menu level:
Change to the "Exit" menu item.
Setup Ch 4
Exit
Confirm your selection.
SET
You return to the next higher menu level or exit the menu.
To directly return to the Setup display:
Press the
ESC
button.
ESC
The "Setup" menu
Activating the automatic lock mode – "Auto Lock"
SET
Setup
Auto Lock
Auto Lock
I na c t iv e
Inactive
Call up
Select the desired
"Auto Lock"
setting
"Stored"
Possible settings: "Active", "Inactive"
The automatic lock mode prevents that the receiving channel is accidentally
changed on the receiver. The lock mode icon
indicates that the lock mode is activated.
For information on how to deactivate the lock mode, refer to page 12.
Adjusting the squelch threshold – "Squelch"
SET
Squelch
Setup
Squelch
L o w
Low
Call up "Squelch"
Select the desired
setting
"Stored"
Possible settings: "Low", "Middle", "High", "Off"
The squelch eliminates annoying noise when the transmitter is switched off
or when there is no longer sufficient transmitter power received by the
receiver.
Auto Lock
Active
Store the setting
SET
G
on the standard display
Squelch
High
Store the setting
SET
| 17
Tourguide 1039
Advertisement
Table of Contents
