Elecom M-SH20DBS User Manual page 18

2.
Connect to a PC
1) Start up your PC.
Please wait until your PC has started up and can be operated.
2) Insert the receiver unit into the PC's USB-A port.
You may use any USB-A port.
For terminals that do not have a USB-A port, such as a MacBook, use the USB Type-C
Ensure that the connector is correctly oriented to the port.
If there is strong resistance when inserting, check the shape and orientation of the connector.
Forcibly inserting the connector may damage the connector, and there is a risk of injury.
Do not touch the terminal portion of the USB connector.
When removing the receiver unit
This product supports hot plugging. The receiver unit can be removed while the PC is on.
3) The driver will be automatically installed, and you will then be able to use the mouse.
You can now use the mouse.
By downloading and installing the "ELECOM Mouse Assistant" from our company website, functions
such as button assignment function and presentation mode can be used. Please proceed to
ELECOM Mouse Assistant".
Change the mouse pointer speed
Adjust the mouse pointer movement speed on your PC if the mouse pointer moves too fast or too slow.
1) Click "Mouse" under "System Settings".
The "Mouse" settings page will load up.
®
hub.
"Install