Table of Contents
Advertisement
13. Have a second person hold the Console (9) near
the Console Bracket (33).
Connect the console wires to the Main Wire (68),
to the Ground Wire (111), and to the two wires
(G) from the Handlebar (7); make sure to con-
nect the console wire that has an "R" tag to
the wire that has an "R" tag. Insert the excess
wire into the Console Bracket (33).
Tip: Avoid pinching the wires. Attach the
Console (9) to the Console Bracket (33) with four
M4 x 16mm Screws (34); start all the Screws,
and then tighten them.
14. Attach the Tablet Holder (10) to the Console (9)
with four #8 x 12mm Screws (82); start all the
Screws, and then tighten them.
15. Set the two Hand Weights (15) on the Hand
Weight Rest (83) and on the Armrests (69, 72).
13
9
7
14
15
15
69
83
13
Avoid pinching
the wires
G
111
33
68
34
10
9
15
72
82
Advertisement
Table of Contents
