Factory Default Setting; Master Drive-Slave Drive Setting; Figure 3.12 Factory Default Setting; Figure 3.13 Jumper Setting Of Master Or Slave Drive - Fujitsu MHV2100AH Product Manual

Installation Conditions

3.4.2 Factory default setting

Figure 3.12 shows the default setting position at the factory.

3.4.3 Master drive-slave drive setting

Master drive (disk drive #0) or slave drive (disk drive #1) is selected.
Open
1 C A
D B
2
Open
(a) Master drive

Figure 3.13 Jumper setting of master or slave drive

Note:
Pins A and C should be open.
3-12
Open

Figure 3.12 Factory default setting

1 C A
Short
Open
2 D B
(b) Slave drive
C141-E217