Installation - Kohler K-45415 Installation And Care Manual

To shower outlet.
Hose Collar
Hose Nut

Installation

Run cold and hot water through the shower outlet to flush out
dirt and debris.
Insert the screen washer into the end of the inlet of the
handshower.
Thread the hose collar onto the inlet.
Thread the hose nut to the shower outlet.
Wrench tighten the hose nut to the shower outlet. Do not
overtighten.
Turn on the shower valve (not shown).
Check for leaks at each end of the handshower hose and the inlet
of the handshower. Make any adjustments as needed.
Turn off the shower valve.
Kohler Co.
Inlet
Screen Washer
Handshower
Hose
3
Handshower
1085896-2-D