Use The Pool Cleaner; Setup - Maytronics Dolphin S 300i User Instructions

5. USE THE POOL CLEANER

5.1 Setup

The Pool Cleaner is very simple to use. Simply place it in the pool and make sure that it is correctly
positioned on the floor of the pool.
Turn it ON and enable it to complete the task.
Before using the Pool Cleaner for the first time, perform the following steps:
5.1.1
Position the power supply
so that it is approximately in the
middle of the long side of the
pool at a distance of 3.5m/12ft.
5.1.3 Attach the blue cable to the power supply by
inserting it with the notch on the connector (1) lined
up to the groove in the socket on the power supply.
Turn it clockwise (2).
S 300i User Instructions
3.5m/12ft
5.1.2
has no kinks.
1
2
Unwind the blue cable and stretch it out completely so that it
5.1.4 Plug in the power supply
and leave it in the OFF position.
5