Print Server - Siemens Gigaset SX763 WLAN dsl Manual

Print Server

Your device's integrated print server allows you to provide a USB printer for all users in
the local network.
Notes:
The Windows Vista, Windows XP or Windows 2000 operating system is a prereq-
u
uisite for using the print server.
Only printer functionality is supported in the case of multifunction devices (com-
u
bination of printer, scanner or fax). You can obtain additional information by con-
tacting the hotline or else on the Internet (address see Quick Start Guide).
If you wish to use this function, you must first connect a USB printer to your device's USB
port. The device must be shown in the screen. You can check the status of the connec-
tion to the USB device on the Advanced Settings – USB screen.
ì
In the Advanced Settings menu, select: USB – Print Server
ì
Activate your devices integrated print server.
You can set up the connected printer on your PC by using the IP address of the Gigaset
SX763 WLAN dsl shown here when configuring the printer.
ì
Click OK to accept the changes.
You will find information on setting up the printer connected to the Gigaset SX763
WLAN dsl in the section entitled "Using the USB port" on page 144.
Configuring Advanced Settings
119