Siemens Gigaset SX763 WLAN dsl Manual page 169

Gigaset SX763 WLAN dsl functions and their interdependency
The following table shows which functions of your device are possible in which
combination. In the case of error, check that the following conditions are fulfilled:
Function
WPS
WDS
Operating information:
USB port
u
If connecting a device without its own power supply directly to the USB port,
please note that the power consumption must not exceed 500 mA. If this value is
exceeded, you will have to use a separate power supply unit for your USB device
or connect a USB hub with a separate power supply. A USB hard drive and a USB
printer can be operated simultaneously on a USB hub.
LAN ports
u
The LAN ports may only be used for in-house networks. The ports are destroyed
externally if there is a power surge.
Telephone ports
u
The phone ports are only suitable for connecting in-house phones/phone systems.
The ports are destroyed externally if there is a power surge.
Possible in combination with
WPA2-PSK/WPA-PSK
encryption
no encryption
WEP encryption
no encryption
Appendix
Not possible in combina-
tion with
WPA2/WPA authentication
WEP encryption
WPA2-PSK/WPA-PSK or WPA2/
WPA authentication
169