SHUTTER (Shutter Speed) setting
Select the desired shutter speed for camera exposure.
You can change the shutter speed to higher speed
to capture fast-moving subjects, though the image
becomes darker.
1. Select [SHUTTER] option on the [EXPOSURE]
menu.
2. Use [Near] or [Far] button to set shutter speed.
(x512, ... , x2
y
1/160, ... , 1/90 000)
SENS-UP setting
If pictures are not clear due to darkness, use for
increase the sensitivity of picture.
1. Select [SENS-UP] option on the [EXPOSURE]
menu.
2. Use [Near] or [Far] button to set the SENS-UP
limit (OFF, AUTO x2 to AUTO x128).
To setting the SENS-UP function, select the
[AUTO] on the [SHUTTER].
Note:
If you set to one of the SHUTTER options except
AUTO on the [SHUTTER] menu, the [SENS-UP] set-
ting is not available and [---] mark is displayed.
8
LT303P-B.HAP_ENG_MFL66987622.ind28 28
AUTO
OFF
A.FLK
y
y
y
White Balance setting
Select the method by which the camera shifts its
output colors to compensate for the color of a light
source.
1. Select [WHITE BALANCE] option on the
[CAMERA SET] menu.
2. Use [Near] or [Far] button to select a mode then
press [Open] or [Close].
ATW (Auto-Tracing White Balance): In this
•
mode, the color temperature range for the
proper white balance is approximately 1 800 K
to 10 500 K. Proper white balance may not be
obtained under the following conditions:
When the color temperature is out of the
-
1 800 K to 10 500 K range.
When the scene contains mostly high color
-
temperature objects, such as a blue sky or
sunset.
When the scene is dim.
-
AUTO: In this mode, the color temperature
•
range for the proper white balance is approxi-
mately 2 700 K to 5 400 K. Proper white bal-
ance may not be obtained under the following
conditions:
When the color temperature is out of the
-
2 700 K to 5 400 K range.
When the scene contains mostly high color
-
temperature objects, such as a blue sky or
sunset.
When the scene is dim.
-
ONE PUSH: If you select the ONE PUSH
•
mode, you will be able to set up the White
Balance automatically using [Open] or [Close]
button.
MANUAL: You can set the white balance
•
options manually.
2011.1.4 6:49:11 PM