Advertisement
"Ghost" view of Rear Suspension Unit
REAR SUSPENSION
The rear wheel is mounted in a fork which is hinged just behind the gear box.
The fork works in bronze bearings and is lubricated by an oil reservoir around the
bushes and this can be replenished with heavy gear oil (SAE 140) by means of a grease
nipple situated above the pivot on the right hand side.
trolled by Girling suspension units. These units are of the sealed unit type, and topping
up is not necessary. The springs are lubricated before assembly and the fluid in the
damper unit is the exact quantity and sufficient for life of the unit.
The unit is shown in illustration 13.
WWW.PlanDeGraissage.ORG
Illustration 13
Movement of the fork is con-
35
35
Advertisement
