Table of Contents
Advertisement
ATEN Secure KVM User Manual
6. Plug the USB Smart Card / CAC reader to the CAC port on the front panel.
Note:
1.
Only appropriate qualified USB authentication devices (e.g., Smart Card and CAC readers by default)
can be plugged into this port. During KVM operation, non-qualified or non-authorized USB devices
will be filtered and rejected (the CAC LED that has port focus will flash). Please refer to the LED
display for visual indications.
2.
CDF (configurable device filtering) function can only be operated by authorized administrators.
.
Please refer to the Administrator's Guide and Port Authentication Utility Guide for details.
7. Plug the female end of the power cord into the ATEN Secure KVM Switches' power socket; plug the
male end into an AC power source.
8. Turn on the ATEN Secure KVM Switch and check that the LEDs light up. The ATEN Secure KVM
Switch will start a self-test.
Note:
The ATEN Secure KVM Switch performs a security self-test at power-on and at each power cycle. Front
panel LEDs will indicate the self-test status and test result. Please refer to the Operation section and LED
Display section for visual identification details.
15
Advertisement
Table of Contents
