Strong SRT 43UD6593 Manual page 17

If you are looking for the LNB list you have to go to General and press OK.
With  you can select the satellite (or satellites) to which your dish is addressed. Press OK to access the
submenu that allows you to activate or deactivate the selected satellite and to set its various parameters.
After all settings have been made, select 8 to continue.
NOTE: To con gure the DiSEqC or Unicable parameters it is necessary to select MORE in the previous
steps.
Satellite
antenna type
Select
the operator
LNB list
Next
Astra4A/SES5 5E
Eutelsat 7E
Eutelsat 9E
Hotbird 13E
15
Single
Tone Burst
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Unicable I
General
vùsat
On
Off
Off
Off