Channel Installations For Cable - Strong SRT 43UD6593 Manual

3.1 Channel installations for cable

Select the tuner mode Cable and press OK to continue.
Select one operator from the following list, or select Other if you don't have a prede ned operator or it is
di erent from those listed. Once done press OK to continue.
Note: Not all countries have prede ned operators. If the country you have selected does not have one this
step will be skipped.
First step is to connect the cable. Then you must start the channel scan. You can choose between digital and
analogue channels, only analogue channels or only digital channels. If you skip this step, the channel scan can
be done later by accessing the TV menu. Press OK for your selection.
Tuner Mode
Please select
your tuner mode:
Select the operator
You can select only
one operator from
the following list :
Channel scan
First, please connect the cable.
Star the channel scan now?
If you skip this step,
the channel scan could
be performed in Menu.
11
Antenna
Cable
Satellite
Ziggo
Others
Digital and analog channels
Only analogue channels
Only digital channels
Skip scan