Table of Contents
Advertisement
Problem
The display shows "C3".
The display shows "F102".
The display shows an error
code that is not in this table.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
Service data
If you cannot find a solution to the problem yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do not remove the rating plate from the
appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
The cleaning function does
not operate. You did not fully
close the door, or the door
lock is defective.
•
You did not fully close
the door.
•
The door lock is defec‐
tive.
There is an electrical fault.
The demo mode is activa‐
ted.
.........................................
.........................................
.........................................
Progress 29
Remedy
Fully close the door.
•
Fully close the door.
•
Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
•
If the display shows
"F102" again, contact the
Customer Care Depart‐
ment.
•
Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
•
If the display shows the
error code again, contact
the Customer Care De‐
partment.
Refer to "Using the settings
menu" in "Additional func‐
tions" chapter.
Advertisement
Table of Contents
