Table of Contents
Advertisement
Oven func‐
tion
Bread Baking
Keep Warm
Notes on: Moist Fan Baking
This function was used to comply with the
energy efficiency class and ecodesign
requirements (according to EU 65/2014
and EU 66/2014). Tests according to:
IEC/EN 60350-1.
The oven door should be closed during
cooking so that the function is not
interrupted and the oven operates with the
highest energy efficiency possible.
When you use this function the lamp
automatically turns off after 30 sec.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter,
Energy Saving.
How to set: Heating Functions
1. Turn on the oven with
The display shows the set temperature,
the symbol and the number of the heating
function.
2. Press
or
function.
3. Press
or the oven starts
automatically after 5 seconds.
Application
Use this function to pre‐
pare bread and bread
rolls with professional-
like result in terms of
crispiness, colour and
crust gloss.
To keep food warm.
.
to set a heating
If you turn on the oven and do not set any
heating function or programme, the oven
turns off automatically after 20 seconds.
How to set: Temperature
Press
or
to change the
temperature in steps: 5 °C.
When the oven is at the set temperature a
signal sounds and the Heat up indicator
disappears.
How to check: Temperature
You can check the current temperature in
the oven when the function or programme
works.
1. Press
.
The display shows the temperature in the
oven.
Press
again to change the set
temperature.
2. Press
or the display shows again
the set temperature automatically after
5 seconds.
How to set: Fast Heat Up
Do not put food in the oven when the Fast
heat up works.
The Fast Heat Up is available only for
some heating functions. If Faulty Tone is
turned on in the settings menu, the signal
sounds if the Fast Heat Up is not available
for the set function. Refer to "Additional
functions" chapter, Using the settings
menu.
The Fast Heat Up decreases the heat up
time.
To turn on the Fast Heat Up press and
hold
for more than 3 seconds.
If the Fast Heat Up is turned on the
display shows flashing bars.
Progress 13
Advertisement
Table of Contents
