Table of Contents
Advertisement
Step 8
Clean the glass panels with water and soap. Dry the glass panels carefully. Do not
Step 9
If the door is installed correctly, you will hear a click when closing the latches.
Make sure that you put the glass panels (A
and B) back in the correct sequence. Check
for the symbol / printing on the side of the
glass panel, each of the glass panels looks
different to make the disassembly and as‐
sembly easier.
When installed correctly the door trim
clicks.
Make sure that you install the middle panel
of glass in the seats correctly.
How to replace: Lamp
WARNING! Risk of electric
shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until
the oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
clean the glass panels in the dishwasher.
After cleaning, install the glass panels and the oven door.
Before you replace the lamp:
Step 2
Disconnect the oven from
the mains.
A
B
Always hold the halogen lamp with a cloth
to prevent grease residue from burning on
the lamp.
Put a cloth on the bottom of
Progress 27
A
B
Step 3
the cavity.
Advertisement
Table of Contents
