Key Tone; Home Area Code - AT&T BL102-3S Quick Start Manual

Telephone settings
Telephone settings

Key tone

The handset is set to beep with each key press. You can adjust the
key tone volume or turn it off.
1. Press MENU/
2. Use q or p
CID
3. Use q or p
CID
4. Use q or p
CID
/SELECT to save your preference.
5. Press
MENU

Home area code

If you dial seven digits to make a local call (no area code required),
enter your area code into the telephone as the home area code.
When you receive a call from within your home area code, the caller
ID log only displays the seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID
log. If you dial ten digits to make a local phone call, do not use this
home area code feature. If you do, you cannot place local calls from
your caller ID log, as they will have only seven digits.
To set the home area code:
1. Press MENU/
2. Use q or p
CID
3. Use q or p
CID
/SELECT.
MENU
4. Use the dialing keys to enter a three-digit home area code.
Press
MUTE
f
Press and hold
f
5. Press
MENU
in idle mode to enter the main menu.
SELECT
to scroll to Settings, then press
DIR
to scroll to Key tone, then press
DIR
to select On or Off.
DIR
in idle mode to enter the main menu.
SELECT
to scroll to Settings, then press
DIR
to scroll to Home area code, then press
DIR
/DELETE to delete a digit.
/DELETE to delete all digits.
MUTE
/SELECT to save.
20
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU