Advertisement
USING YOUR AIR CONDITIONER
OVERVIEW OF CONTROLS
PRE-INSTALLATION INSTRUCTIONS
REQUIRED TOOLS (NOT INCLUDED)
Phillips Screwdriver
Scissors
FUNCTIONS
Note: The controls featured in this manual may be slight-
ly different from yours.
Cooling Mode
The desired cool setting is selected by rotating the
MODE knob to the desired setting:
"high cool" provides maximum airflow and cooling effect
"low cool" provides minimum airflow and cooling effect
Fan Mode
The desired fan setting is selected by rotating the MODE
knob to the desired setting:
"high fan" provides maximum airflow
"low fan" provides minimum airflow
Thermostat
The thermostat is set by adjusting the TEMP knob to
the desired relative room temperature. This only has an
effect when the unit is being operated in high cool or
low cool mode.
To set the desired relative room temperature, rotate
the TEMP knob to the desired setting, with 1 represent-
ing the warmest setting and 7 representing the coldest.
After the set temperature is achieved, the air condition-
er will automatically start and stop the compressor in
order to maintain the desired set temperature.
Pencil
Tape Measure
–8–
Level
Advertisement
