Table of Contents
Advertisement
en Cleaning and servicing
Pull out the heat exchanger cover
3.
by the handle.
Cleaning the base unit
You can remove any visible dirt in the
base unit.
Open the base unit → Page 51.
1.
Use a soft brush to clean the heat
2.
exchanger cover.
Make sure that you remove all dirt
from the seal.
Pull the insert out horizontally.
3.
52
Clean the insert under running wa-
4.
ter and dry it off.
Clean the opening with a soft,
5.
damp cloth.
Slide the insert in horizontally as
6.
far as it will go.
Close the base unit → Page 52.
7.
Closing the base unit
Requirement: The base unit is open.
→ "Opening the base unit", Page 51
Advertisement
Table of Contents
