Table of Contents
Advertisement
Press
.
▶
lights up and the appliance is
a
enabled for remote start via the
Home Connect app.
Deactivating remote start
Press
.
▶
goes out.
a
16.7 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
Unique appliance identification
¡
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
Security certificate of the Wi-Fi
¡
communication module (to ensure
a secure data connection).
The current software and hardware
¡
version of your appliance.
Status of any previous reset to
¡
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
17 Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
17.1 Overview of the basic
settings
Basic setting
end signal
button signal
Auto Power Off
Language
Aut. network log-
in
Man. network
log-in.
Basic settings en
Description
Volume of the
signal emitted
when the pro-
gramme ends
Volume of the
signal emitted
when the buttons
are pressed
Time period
¡
until automatic
switch-off
Activate or de-
¡
activate auto-
matic switch-
off of the appli-
ance
Changing
the language
Connect the ap-
pliance to a
WLAN home net-
work (Wi-Fi) with
WPS function.
→ "Setting up
Home Connect",
Page 46
Connect the ap-
pliance to a
WLAN home net-
work (Wi-Fi)
without WPS
function.
→ "Setting up
Home Connect",
Page 46
47
Advertisement
Table of Contents
