Table of Contents
Advertisement
The appliance care programme
a
continues.
"Finished, remove washing " ap-
a
pears on the display and a signal
tone sounds once the appliance
care programme has ended.
Pull out the condensation con-
4.
tainer horizontally and empty it.
If you are draining the condensa-
5.
tion water using the drain hose:
Remove the stopper from the
‒
underside of the condensation
container.
Insert the stopper into the re-
‒
cess on the top of the condens-
ation container.
Insert the condensation container
6.
so that it locks into place.
19 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
19.1 Tips on cleaning and
care
Wipe down the
housing and the
controls with
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Leave the appli-
ance door open
after use.
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
Cleaning and servicing en
19.2 Base unit
The base unit is the accessible area
at the bottom of the appliance in
which you will find the heat ex-
changer.
Opening the base unit
Requirements
The appliance has cooled down
¡
for 30 minutes.
The appliance door is closed.
¡
Open the maintenance flap.
1.
If you place a cloth beneath the
maintenance flap, you can collect
the remaining water from the base
unit.
Open the lever for the heat ex-
2.
changer cover.
51
Advertisement
Table of Contents
