Table of Contents
Related Manuals for Siemens WQ55A2D80W
Summary of Contents for Siemens WQ55A2D80W
- Page 1 Tumble dryer WQ55A2D80W User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 8 Dryness level...... 25 1.1 General information.... 4 8.1 Changing the dryness level.. 25 1.2 Intended use....... 4 8.2 Adjusting the dryness level .. 25 1.3 Restriction on user group... 4 9 Programmes ....... - Page 3 15 Basic settings...... 37 15.1 Overview of the basic set- tings........ 37 15.2 Changing the basic set- tings........ 38 16 Appliance care ...... 38 16.1 Preparing the appliance for the appliance care pro- gramme ......... 38 16.2 Preparing the condensation container for the appliance care programme..... 39 16.3 Starting the appliance care programme...... 39...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
- Page 9 Safety en ▶ Rinse the laundry thoroughly with warm water and detergent be- fore drying it in the machine. ▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite.
-
Page 10: Safe Cleaning And Maintenance
en Safety 1.6 Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. -
Page 11: Preventing Material Damage
Preventing material damage en Do not use hard scouring pads or ▶ 2 Preventing material cleaning sponges. Clean the appliance with nothing damage ▶ but water and a soft, damp cloth. Remove all detergent residue, Follow these instructions to avoid ma- ▶ spray residue or other residues im- terial damage and damage to the ap- mediately if they come into contact... -
Page 12: Energy Saving Mode
en Installation and connection Check the appliance for visible Observe the programme's maximum damage. load capacity. → "Programmes", Page 26 Open the appliance door. → "Basic operation", Page 30 a If the maximum load is exceeded, Remove any accessories from the this extends the programme dura- drum. -
Page 13: Requirements For The Install- Ation Location
Installation and connection en Included with Description Installation loca- Requirements the appliance tion Wool basket with In a washer-dryer Only use the ori- insert stack ginal connection set from the → "Wool basket", dryer manufac- Page 34 turer when set- ting up this appli- 4.3 Requirements for the in- ance in a stallation location... - Page 14 en Installation and connection hose to drain away excess condens- Pull out the condensation hose ation directly into the waste water from the connecting piece. system. Notes ¡ Operate this appliance using the water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regularly empty the condensation container → Page 33.
- Page 15 Installation and connection en Push the water drain hose as far Insert the stopper into the recess as it will go into the connecting in the top. piece. Insert the condensation container Empty the condensation container → Page 33. → Page 33. Connect the appliance to the water outlet.
-
Page 16: Aligning The Appliance
en Installation and connection 4.5 Aligning the appliance Note: You can use the Y-distrib- In order to reduce vibrations and utor → Page 29 noises, align the appliance correctly. to connect the To align the appliance, turn the ap- ▶ water drain hose pliance feet. Check that the appli- of an additional ance is level using a spirit level. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Air inlet Maintenance flap on the base unit → Page 44 Fluff filter → Page 31... -
Page 18: Wool Basket
en Familiarising yourself with your appliance 5.2 Wool basket Securing foot Wool basket Insert Tab for securing in the hook 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 26 Programme selector → Page 30... -
Page 19: Display
Display en 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining Timed programme The timed programme is set. → "Timed programmes", Page 27 + 8h "Ready in"... -
Page 20: Dryness Level
en Display Display Designation Description Dryness level: The dryness level is activated. Cupboard Dry → "Buttons", Page 23 Dryness level: The dryness level is activated. Cupboard Dry → "Buttons", Page 22 Plus Dryness level ad- The adjusted dryness level is activated. justed → "Buttons", Page 22 → "Buttons", Page 23 → "Buttons", Page 23 60'/ 120' Crease-reduction... - Page 21 Display en Display Designation Description End of pro- Programme status gramme Example...
- Page 22 en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description 开始 / 暂停 ¡ Start Start, cancel or pause (Start / Pause) the programme. ¡ Cancel ¡ Pause 定时 + 预约 ¡...
- Page 23 Buttons en Button Selection Description 全干即穿 全干即穿 ¡ Selecting 全干即穿 ¡ (CupboardDry ) activates the dryness ¡ +1 level. ¡ +2 The dryness level ¡ +3 defines how damp or dry the laundry is after the programme ends.
- Page 24 en Buttons Button Selection Description 预约 Up to 24 hours Set the programme end. (Ready in) The programme duration is already included in the set number of hours. Once the programme has started, the pro- gramme duration is dis- played.
-
Page 25: Changing The Dryness Level
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result 超干储藏 Multi-layered, thick laundry The laundry is dry. that does not dry readily. -
Page 26: Programmes
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 27: Timed Programmes
Programmes en Programme Description Max. load (kg) Dry weatherproof and outdoor clothing 运动装 with a membrane coating and water-repel- （Sports) lent fabrics. Suitable for shirts and blouses made of 衬衫 cotton, linen, synthetics or blended fab- （Shirts） rics. Note: For optimal drying results, dry a maximum of 5 shirts or 5 blouses at the same time. - Page 28 en Programmes Timed program Description Max. load (kg) Dry all types of fabric except for wool and 热风定时 (Time Dry) silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry. Warm dry cotton blankets with silk filling 10.0 蚕丝被...
-
Page 29: Accessories
QR code in the table of Remove all items from any pock- ▶ contents or on www.siemens- ets in your laundry before using home.bsh-group.cn. the appliance. -
Page 30: Basic Operation
Press 开始 / 暂停. scanning the QR code in the table of ▶ contents or on www.siemens- a The display shows either the pro- home.bsh-group.cn. gramme duration or the "Ready in" time. 12.1 Switching on the appli- a After the programme has ended, the display shows: End. -
Page 31: Cancelling The Programme
operation en the drum is rotating. If you want to Requirements avoid or cancel the cooling pro- ¡ The display shows the following cess, open the door. after drying: End → "Display", Page 20 ¡ or during operation: . Open the appliance door. Open the door. - Page 32 en operation Disconnect the two-part fluff filter. Clean the two fluff filters thoroughly under warm, running water and then dry them off. Open the two fluff filters. Close the two fluff filters and put them together. Remove the fluff. Insert the two-part fluff filter. Close the door.
-
Page 33: Condensation Container
operation en Empty the condensation container. 12.10 Condensation con- tainer Condensation forms during drying, which your appliance uses for auto- matic cleaning. By default, the con- densation is collected in the appli- ance's condensation container. Note: Operate this appliance using the water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regu- larly empty the condensation con-... -
Page 34: Childproof Lock
en Childproof lock Insert the feet of the wool basket 13 Childproof lock into the holes in the fluff filter. Secure your appliance against being operated unintentionally using the controls. 13.1 Activating the childproof lock Press and hold the two 定时 + ▶... -
Page 35: The Wool Basket
Wool basket en Place the laundry into the wool Start the programme → Page 30. basket, either directly or using the Remove the wool basket once the insert. programme has ended. → "Examples of how to use the wool basket", Page 35 14.3 Examples of how to use the wool basket ATTENTION! If items of laundry in the wool basket... - Page 36 en Wool basket Example Sports shoes Lift the tongues of the shoes. Remove the in- soles or heel cushions. Place a rolled-up hand towel in the wool basket to create an in- clined surface. Place the shoes on the towel with the heels facing down.
-
Page 37: Basic Settings
Basic settings en 15 Basic settings You can configure the basic settings for your appliance to meet your needs. 15.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 38: Changing The Basic Set- Tings
en Appliance care Remove the laundry. 15.2 Changing the basic set- tings Set the programme selector to po- sition 1. Close the appliance door. Pull out the condensation con- tainer, keeping it level. Press 微干挂烫 and, at the same time, turn the programme selector to position 2. -
Page 39: Preparing The Condensation Container For The Appliance Care Programme
Appliance care en 16.2 Preparing the condensa- 16.3 Starting the appliance tion container for the ap- care programme pliance care programme Requirements ¡ The appliance is ready to run the Note: If the condensation is drained appliance care programme. using the drain hose, the condensa- → "Preparing the appliance for the tion container must be prepared be- appliance care programme ",... - Page 40 en Appliance care seconds. The note is shown re- a The appliance care programme peatedly until the basic appliance starts and an audible signal care programme has been run com- sounds. pletely. a End appears on the display once the appliance care programme has Requirements ended and an audible signal ¡...
-
Page 41: Preparing The Appliance For The Intensive Appliance Care Programme
Appliance care en Insert the condensation container Requirements so that it locks into place. ¡ The appliance is ready to run the appliance care programme. → "Preparing the appliance for the appliance care programme ", Page 38 ¡ The appliance care programme has started. → "Starting the appliance care pro- gramme", Page 39 Press... - Page 42 en Appliance care Pour a bottle of the original appli- Pull out the condensation con- ance care product tainer horizontally and empty it. → "Accessories", Page 29 and ap- prox. 1 ½ litres of warm tap water into the condensation container. Add approx. 1 ½ litres of hot tap water into the condensation con- tainer.
-
Page 43: Ending The Intensive Appli- Ance Care Programme
Appliance care en Pull out the condensation con- 16.7 Ending the intensive ap- tainer, keeping it level. pliance care programme Add approx. 1 ½ litres of hot tap water into the condensation con- tainer. Empty the condensation container → Page 33. Hold the full condensation con- tainer level so that no liquid spills out. -
Page 44: Cleaning And Servicing
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.cn. 17.1 Tips on cleaning and If you place a cloth beneath the... - Page 45 Cleaning and servicing en Pull out the heat exchanger cover Clean the insert under running wa- by the handle. ter and dry it off. Clean the opening with a soft, Cleaning the base unit damp cloth. You can remove any visible dirt in the base unit.
-
Page 46: Moisture Sensor
en Cleaning and servicing Insert the heat exchanger cover by ance changes the duration of the the handle. automatic programme depending on the residual moisture in the laundry. Cleaning the moisture sensor Over time, residue from limescale, detergents and care products can build up on the moisture sensor. -
Page 47: Condensation Container Filter
Cleaning and servicing en Slide in the filter as far as it will go. 17.4 Condensation container filter During drying, fluff from the laundry gets into the condensation. The filter in the condensation container pro- tects the appliance from fluff. Clean the filter for the condensation tank. -
Page 48: Troubleshooting
en Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 49 Troubleshooting en Fault Cause and troubleshooting Creasing. The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished. Spread the items of laundry for cooling. Unsuitable programme for the type of fabric. Set the suitable programme for the type of fabric.
- Page 50 en Troubleshooting Fault Cause and troubleshooting Condensation in the The appliance uses condensation for the automatic condensation tank self-cleaning. even though the water Not a fault – no action required. ▶ drain hose is connec- Water drain hose is not connected correctly. ted.
- Page 51 Troubleshooting en Fault Cause and troubleshooting Automatic self-cleaning function rinses the appliance's heat exchanger. Not a fault. Do not pull out the condensation tank. Do not cancel the programme. Water is leaking from Appliance is not correctly aligned. the appliance. → "Aligning the appliance", Page 16 ▶...
- Page 52 en Troubleshooting Fault Cause and troubleshooting The laundry is too Moisture sensor dirty. damp. → "Cleaning the moisture sensor", Page 46. ▶ The drying process is interrupted and the condensa- tion tank has been filled. → "Emptying the condensation container", Page 33. → "Inserting the condensation container", Page 33. → "Starting the programme", Page 30.
-
Page 53: Transportation, Storage And Disposal
Transportation, storage and disposal en Secure the water drain hose on the 19 Transportation, stor- appliance against unintentional loosening. age and disposal Ensure that you do not bend the You can find out here how to prepare water drain hose. your appliance for transportation and Empty the condensation container storage. -
Page 54: Customer Service
en Customer Service Unplug the appliance from the 20.1 Product number (E-Nr.) mains. and production number Cut through the power cord. (FD) Dispose of the appliance in an en- vironmentally friendly manner. You can find the product number (E- Nr.) and the production number (FD) Information about current disposal on the appliance's rating plate. -
Page 55: Technical Data
Technical data en Permissible oper- ¡ Ambient tem- ating conditions perature 0–40 in accordance °C, not freez- with GB/T 23118 ¡ Relative hu- midity less than 80% at 25 °C, non- condensing Length of the 145 cm power cord... - Page 56 总经销商：博西家用电器（中国）有限公司 地址： 中国江苏省南京市鼓楼区清江南路18号3幢 客户服务热线：400 889 9999 客户服务电子邮箱： careline.china@bshg.com 制造商：博西华家用电器有限公司 地址： 安徽省滁州市滁州经济技术开发区世纪大道1号 www.siemens-home.bsh-group.cn *9001700774* 9001700774 (020324)