Ordinary Sewing Setting Mode - Janome Memory Craft 9450QCP Instruction Book

!1 Background Color
You can select from the colorful wallpapers for the
background of the visual touch screen by pressing the
relevant icon.
!2 Auto-off Timer
The machine will be automatically turned off if you do not
use the machine within the time period set by this timer.
The auto-off timer can be set from 1 to 12 hours.
If you wish to turn off the timer, press and hold the "+" key
until "OFF" shows in the timer window.
!1
To turn on the machine again, turn the power switch on.
!3 Reset All to Defaults
Press the Yes key to reset all the parameters to the
original values (factory settings).
!2
Press the OK key to register the new settings.
!3

Ordinary Sewing Setting Mode

q Auto thread tension
You can adjust the auto thread tension level by pressing
the "+" or "–" key.
w Low bobbin thread warning
You can adjust the low bobbin thread warning level by
pressing the "+" or "–" key.
To turn off the low bobbin thread warning, press the "–"
key until "OFF" shows in the window.
e Needle stop position
The machine always stops with the needle in the down
q
position except when sewing buttonholes, specialty
stitches, monograms, etc. However you can change the
needle stop position to up by pressing the needle up key.
NOTE:
w
The machine stops with the needle in the down
position if Foot-up key option is turned on, even if the
needle stop position is set to up position.
Press the next page key to show the next menu.
e
108