Ordinary Sewing Mode Settings - Janome MC 11000 Instructions Manual

SET1
Auto Tension
1
Auto
-
Remaining Bobbin Thread
2
2
-
3
Feed Dog
Thread Cut after Auto-Lock
4
5
Favorite Stitch
Adjustment
+
+
on
off
Register
22

Ordinary sewing mode settings

1 Auto thread tension
The auto thread tension level can be adjusted with the
"+" or "–" key.
2 Low bobbin thread warning
The low bobbin thread warning level can be adjusted
with the "+" or "–" key.
3 Drop feed option
This option allows you to sew the decorative stitches
with the feed dog lowered. Press the drop feed key
to lower the feed dog. When you start the machine, the
warning message will appear to advise you to raise the
feed dog, however you can continue sewing with the
feed dog lowered.
To raise the feed dog, return to the ordinary sewing
setting mode and press the raise feed dog key
then press the register key.
4 Auto thread cutting
In the following cases, the machine will trim the threads
and stop automatically, if you check the box by pressing
the "on/off" key .
1. Pressing the auto lock button
2. The auto lock stitch is programmed.
3. Sewing monogram
4. Sewing the pictograph patterns
5 Color options
Press the key to select one of the 3 colors for the
pattern selection keys, which will display in the color
shown.
To change the screen background color, press the
key to open the custom color window.
To select the hue, press one of the 24 color tiles.
To change the shade of the selected color, press and
drag the slider up or down.
6 Favorite stitch adjustment on/off
If you wish to save the altered settings for the utility
stitches for the future use, press the
the box on.
key to check