Table of Contents
Advertisement
q
w
(−)
(4.5)
(+)
(−)
(+)
e
w
(−)
(3.0)
(+)
(−)
(+)
42
Manual Stitch Settings
You can alter the stitch width (or needle drop position of
the straight stitches) and stitch length.
Press the "+" or "–" key beside the setting you wish to
change. Press default key e to recover the original stitch
setting.
When you press the setting bar, the manual setting
window expands to show more options.
You can alter other settings such as needle thread
tension and presser foot pressure value, depending on
the selected stitch pattern.
Press the setting bar again to shrink the manual setting
window.
q Setting bar
w Manual setting window
e Default key
Altering needle drop position (straight stitches)
Press the "+" key to move the needle drop position to the
right.
Press the "–" key to move the needle drop position to the
left.
Altering stitch width
Press the "+" key to increase the stitch width.
Press the "–" key to decrease the stitch width.
NOTE:
The adjustable range of patterns U6-U10 is 0.0 to 7.0.
Altering stitch length
Press the "+" key to increase the stitch length.
Press the "–" key to decrease the stitch length.
NOTE:
The adjustable range of patterns U6 is 0.0 to 5.0, U7
is 1.0 to 5.0, U8-U10 is 0.0 to 5.0.
Advertisement
Table of Contents
