Monogramming; Function Keys - Janome Memory Craft 9450QCP Instruction Book

w
e
r
t
i o
y
u
y
q
!0 !1

MONOGRAMMING

You can program letters and symbol designs for
monogramming.
Press the Monogram key and the font selection window
will open.
You can select one of 4 fonts*.
Select the desired font by pressing the corresponding
key.
q Monogram key
w Block font key
e Script font key
r Broadway font key
t Block font (9 mm) key
The monogram mode window will open.
NOTE:
• The height of Block font (9 mm) is approximately 9
mm.
* If you select Russian or Japanese language for
the visual touch screen, you can select Cyrillic
alphabets or Japanese font as well.

Function Keys

y Cursor key
Press the cursor key to move the cursor up or down.
u Edit box
Press the edit box to view the entire monogram.
i Letter size key
Press this key to select the full size (L) or small size (S).
o Letter case key
Press this key to select the upper case or lower case.
!0 Delete key
Press this key to delete the selected character or symbol.
!1 File save key
Press this key to save the monogram as a data file.
NOTE:
Numbers, symbols and European letters are available
on pages 2/5 through 5/5.
80