Ordinary Sewing Setting Mode - Janome Memory Craft 10001 Instruction Manual

Janome MC10001 Instruction Manual
Auto Tension
1
2 Remaining Bobbin Thread
3
Feed Dog
4
Free Arm Length
Common
Set
www.aaasewing.com
Auto
2
Register
Ordinary
Embroidery
Sewing
6
Ordinary Sewing Mode Setting
In this mode you can set the following sewing
functions:
1 Auto Tension
The Auto Thread Tension level can be
adjusted.
Tension level can be set from – 5 to + 5.
Changes are made in increments of 1 and the
default setting is 0 (Auto).
Press the
higher.
Press the
5
lower.
2 Remaining Bobbin Thread
7
E
The Visual Touch Screen will display "Bobbin
Thread almost out" when the bobbin thread is
running low. The Thread Sensor detects the
remaining amount of thread in the bobbin.
It has 5 adjustable steps, 0 to 4.
Press
for the warning message to be displayed.
Press
level for the warning message to be displayed.
NOTE:
• This is an approximate guide to setting the
bobbin thread sensor.
3 Feed Dog
You can drop or raise feed dog by pressing the
key or the
4 Free Arm Length
The carriage will move allowing you to use the
full length of the Free Arm, when you press
key.
Press
home position.
5 Page Key
You can turn the pages by pressing the Page
keys.
6 Register key
Press this key to register the settings and
return to the previous screen.
7 Return key
Press this key to return to the previous screen
without registering the settings.
28
key, to set the tension level
key, to set the tension level
key to increase thread amount level
key to decrease thread amount
key.
key to return the carriage to its
MC10001 Owners Manual/ User Guide